Wide material adaptability, coarse, fine and ultrafine powder and other moldering, fiber or flake material mixing will have a good adaptability.
Product features:
> The mixing method can be configured with different mixing rod shapes according to different materials, such as single, double screw belt or screw belt + flying knife
The utility model has the advantages of small accumulation, simple replacement, beautiful appearance, convenient cleaning and good mixing effect
To achieve powder liquid mixing, powder powder mixing and powder country powder and other powder efficient mixing
Heavy but large material clear and.
Working principle
The Notch Shape Mixer mainly relies on mechanical agitators, air flow and jets of liquid to be mixed, etc.,
so that the material to be mixed is stirred to achieve uniform mixing. Agitation causes part of the liquid to flow, and the flowing liquid pushes the liquid around it, resulting in the formation of a circulating liquid flow in the dissolver, and the resulting diffusion between the liquids is called the main convection diffusion.
When the liquid flow rate caused by agitation is very high, shearing occurs at the interface between the high-speed liquid flow and the surrounding low-speed liquid flow, resulting in a large number of local vortexes.
These vortexes spread rapidly around, and then roll more liquid into the vortex, and the disordered convective diffusion formed in a small area is called vortex diffusion. Mixing requires that all materials involved in the mixing be evenly distributed. The degree of mixing is divided into three states: ideal mixing, random mixing, and completely unmixed.
Main structure
The Notch Shape Mixer is mainly composed of five components:
1. Mixer Reducer
The mixer reducer is the main transmission structure of the slot mixer, which is located on the right side of
the slot mixer, and the motor installed in the base machine drives the worm and worm gear through the
triangle belt during work, and drives the mixer with a deceleration of 1:40. The worm wheel shaft is hollow
and equipped with fixed keys, which allows the mixing paddle to be freely loaded and disassembled. The
top of the reducer is equipped with 2 ring screws for installation, disassembly and installation. The end
cap is equipped with a screw for the positioning of the high-speed mixing paddle, which has been
adjusted at the factory and generally does not need to be adjusted in use.
2.Mixer Groove
The groove mixer is u-shaped, made of stainless steel, equipped with a mixing paddle, which lies
horizontally on the mixing reducer and the pouring reducer.
3. Discharge Reducer
The discharge reducer is to control the positioning angle of the mixing tank, which is located on the left
side of the trough mixer, and when working, the motor installed in the frame drives the worm and worm
gear through the V-belt, driving the mixing groove to rotate in a certain angle range, so that the mixed
material is poured out at once.
4. Frame And Motor Unit
The base is an overall structure, the motor is installed on the movable board on both sides of the slot
mixer base, and the upper and lower parts of the motor can be adjusted by screws, so that the V-belt can
get a certain tightening and maintain the transmission of power.
5. Electrical Control Box
The electrical control box is to control the movement of the slot mixer.
Features
1. The volume can be customized, the mixing effect is good, and the uniform mixing degree of the
material can reach more than 99.5%.
2. The mixing method can be configured with different mixing rod shapes according to different
materials, such as single and double screw belt or screw belt + throwing knife
3. The stirring effect of low energy consumption is more suitable for the chemical reaction of the
material
4. A variety of closed feeding methods are preferred for feeding, and the caliber can be seamlessly
closed
5. The discharge method is reasonable and efficient, so as to achieve no residue of the material, and the
discharge is more thorough and stable
6. Realize the efficient mixing of powder-liquid mixing, powder-powder mixing and powder-solid powder,
which is especially suitable for material mixing with high mixing uniformity requirements and large
material specific gravity difference.
Product advantages
● Good dispersion: The equipment completely solves the problems of low uniformity and dead angle
caused by the different proportions of materials. This equipment adopts a mixed structure of five-axis
with flying knife mortar, which can effectively disperse various staple fibers.
● Wide range of use: The equipment can meet the production of dry mortar with different performance
requirements. Such as: masonry mortar, plaster mortar, polymer mortar required for thermal insulation
system, polystyrene particle moisturizing mortar and other dry powder mortar.
● Small investment: The device has obvious price advantages. Small investment, quick results.
●Simple and convenient to use: the equipment has a small footprint, simple operation, low energy
consumption, and can produce 5-8 tons per hour.
●Long service life: The vulnerable parts of this equipment are all made of high-strength wear-resistant
steel as parts. It has the characteristics of long service life.
Technical parameters
Product Details
Advantages and Disadvantages
Advantages: The advantages of the groove mixer are that it has a compact structure and small
footprint, simple operation, beautiful appearance, convenient cleaning, better mixing effect, etc.,
under the premise of the same volume and the same material, the price is significantly cheaper than
other types of mixers.
Disadvantages: The disadvantage of this model is due to the S-type mixing paddle and the bottom of
the barrel has a gap of 3-5mm, although the material at the gap can be driven by the friction between
the materials when mixing, but from a microscopic point of view, there is still a little bit of sinking
phenomenon, in the case of material mixing is not too harsh can be ignored!
Attention
1. before use should be an idling test, before the test should check the degree of all the fasteners of
the machine, the amount of oil lubricated in the reducer and the grade is correct, whether the
electrical equipment line has fall off phenomenon, when the power supply is idling, you should pay
attention to the direction of the paddle, if the paddle direction is running correctly, that is, the
electrical control is all correct, generally empty car operation behind all the debugging and
synchronization position before leaving the factory;
2, the air transport test should be tested according to the instructions, if there is no abnormal sound,
the temperature of the bearing reducer can be put into production without direct rise;
3, the stirring paddle disassembly and assembly of the middle connection nut should use special tools,
must not be hard knocked out, so as not to damage the parts, stirring pulp should pay attention to
smooth extraction when removed, so as not to bend the shaft, resulting in concentric deformation of
the two axes;
4. When it is necessary to shovel the bracket wall material in operation, the bamboo and wood tools
should be used after stopping, and do not use your hands to avoid accidents;
5. If the abnormal vibration or abnormal sound of the machine is found in use, it should be stopped
immediately for inspection;
6, the load should not be too large when using, generally measured by the motor load, and no more
than 6A is normal;
7. The sealing ring at both ends of the mixing pulp should be kept clean, and there are rectangular
holes in the lower part of the mixed groove wall plate, which should be kept unobstructed and should
not be blocked;
8. The management personnel must be familiar with the technical performance, internal structure and
control system of the machine, and must not leave the work during operation, so as not to cause
unnecessary accidents and affect production.
