Characteristic introduction
Material selection
The mixer can be customized with carbon steel, manganese steel, 304 stainless steel, 316L stainless steel,
321 stainless steel and other materials, and different materials can also be combined;
Equipment material selection distinction:
a.The material contact and non-contact with the material part---
b.The mixer can also be targeted to increase such as anti-corrosion, anti-bonding, isolation, wear-resistant
and other functional coating or protective layer;
c. Stainless steel surface treatment is divided into sandblasting, drawing, polishing, mirror and other
treatment methods, and can be applied to different use parts;
Drive power configuration
According to the nature of the material, the starting method, and the mixing method, the mixer is
equipped with different capabilities, different power, and different output speeds.
The drive motor selection is: Ordinary motor, Vandal-proof motor, Frequency conversion motor,
High-efficiency and Energy-saving motor, High protection level motor, and motor under different voltage;
Commonly used reducers: gear reducers, cycloidal needle wheel reducers, general-purpose gear reducers,
planetary gear reducers;
Commonly used connection methods: direct connection, pulley connection, hydraulic coupling connection.
Mixed Device
The mixer can be configured with different agitators according to the nature of different materials;
Conventional material mixing: different powders mix with each other, the same kind of material batch
mixing, powder added to a small amount of liquid mixing, liquid powder mixing to the slurry, slurry
thickening or dilution, granular and powder mixing, granular and granular mixing, clump crushing and
mixing, cooling or heating mixing, etc.
The mixer modified by the horizontal mixer can be divided into:
a.internal and outer double helix type,
b.paddle screw belt type,
c.internal and external broken screw belt type,
d.razor type and so on.
Discharge Device
The mixer is conventionally configured with pneumatic curved flap valve, when the valve is closed, the
curved flap of the valve is fully fitted to the arc surface of the cylinder body, and in the mixing process,
there is no excess stirring dead angle, so that the mixed material is more uniform; The drive of the valve
can be distinguished into manual, pneumatic and electric;
For reference, there are also powder spherical valves, drum valves, plum blossom misalignment valves,
powder butterfly valves, rotary feeding valves, etc.
Opening Method
Different forms of openings can be provided on the cover of the mixer to meet the use of different working
conditions.
According to the opening function, the manhole, cleaning door, feeding port, exhaust port, dust removal
port, etc. can be set, and the opening form has a flange-type standard opening and a quick-opening door
with a lid;
The mixer can be set to a fully open cylinder lid for easy cleaning of the inside of the equipment.
Auxiliary Components
The mixer can be equipped with a variety of components, commonly used are coil steam jacket,
honeycomb pressure jacket, circulating medium jacket, online sampling valve, high-speed flying knife,
magnetic separator, temperature detection, weighing system, dust removal and purification and other
components;
The jacket of the mixer adopts different forms of jacket according to different heat source media, which
can be heated and cooled, and the high temperature is within 250 degrees Celsius;
When adding a small amount of liquid, it is necessary to configure a spray spray device, which is more
conducive to the uniform dispersion of the liquid mixed in the main material;
The spraying system consists of three basic modules: pressure source, liquid storage tank and sprinkler
head.
Product advantages
1. The bottom discharge mode of the mixer: the powder material adopts the form of pneumatic large
door opening structure, which has the advantages of fast discharge and no residue;
2. Direct connection between the motor and the stirring spindle through the cycloidal needle wheel
reducer, simple structure, high reliability of operation and convenient maintenance;
3. The use of internal and external double-layer screw belt staggered round-trip mixing, mixing speed is
fast, high uniformity;
4. The front and back rotating screw belts are installed on the same horizontal axis to form a low-power
and efficient hybrid environment;
5. It also has a good mixing effect on viscous materials;
Working principle
